P. Mahadevaswamy and B. S. Suresh, “Effect of position and tilt angle of the flap on vibration control plate-A Finite Element Analysis,” International Journal of Mechanics and Solids, 06(1) (2011), pp.27-38.
P. Mahadevaswamy and B. S. Suresh, “Experimental study of effect of tilt angle of the flap on transverse vibration of plate” International Journal of Engineering Research and Technology, 01(10) (2012), pp.1-7.
P. Mahadevaswamy and B. S. Suresh, “Effect of flap position on transverse vibration of rectangular plate with cutout” Journal of Engineering Science and Technology, 9(2) (2014) 233-246. SCOPUS Indexed
P. Mahadevaswamy and B. S. Suresh, “Influence of material of the flap on vibration control of plate -A Finite Element Analysis,” International Journal of Applied Engineering Research, 06(11) (2011), pp.1183-1193.-SCOPUS Indexed
Dr.P.Mahadevaswamy attended Optimization and buckling analysis of rotating gas turbine hollow shaft subjected to twisting moment using FEM International conference on Total Engineering, Analysis and Manufacturing Technologies (TEAM TECH) 2004 held du
Dr.P.Mahadevaswamy presented a papaer on "Development of Al-Titanium Nitride with cenospheres metal matrix composites and its characterization.” National conference on advances in Manufacturing Engineering on 5 th October2009 at Vidhya Vikasa Institu
Dr.P.mahadevaswamy presented “Optimization of thickness ratio for vibration control of plate.” National conference on New trends in Mechanical Engineering, NTME2011 on 21 st October2011 at Acharya Institute of Technology, Bangalore.
Dr.P.Mahadevaswamy presented Experimental study on effect of vibratory flap position on dynamic response of clamped rectangular plate with cut-out”. International Mechanical Engineering Congress - 2014 (IMEC-2014), June 13-15 at National Institute of
Madhu Kumar YC, Umashankar “Evaluation of Mechanical Properties of Aluminum Alloy 6061-Glass Particulates Reinforced Metal Matrix Composites” International Journal of Modern Engineering Research, vol.2, issue 5, 2012, pp 3207-3209.
Madhu Kumar YC, Umashankar “Production and characterization of Al6061-Glass particulate stir cast composite” International journal of Research in Engineering and technology, Vol 05, issue 13, 2016, 152-155.
Madhu Kumar YC, Umashankar “Aluminum Metal Matrix Composite Reinforced with Glass Particulates” Journal of Advances in Science and Technology, Vol.12, Issue.25, 2016, 321-323.
Madhu Kumar YC ‘’ Evaluation of sliding wear behavior of Glass Particle Reinforced Aluminum Alloy 6061 Metal Matrix Composites’’ International Journal of Advances in Scientific Research and Engineering, Vol.3, Special Issue.1, 2017, 146-149.
Biraj Dhibar, Siddarth Vikram Singh, Shoed Anwar, Abhineet Singh, Mahesh S, T Venkategowda , “Sugarcane Bagasse Reinforced Polymer Composites”, International Journal of Engineering Research & Technology (IJERT), ISSN:2395-0056.
1. Tulsidas.D, Shantharaja.M & Kumar.K., “Design Modification for Fillet Stresses In Steam Turbine Blade”, International Journal of Advanced Engineering Technology, Volume III, Issue I, PP 343-346. January-March 2012. GOOGLE SCHOLAR/INDIAN CITATION I
Tulsidas.D, Shantharaja.M & Kumar.K., “Design Modification for Fillet Stresses In Steam Turbine Blade”, International Journal of Advanced Engineering Technology, Volume III, Issue I, 343-346, January-March 2012.
Tulsidas.D, Ranganatha.S.R & Chittappa.H.C, “Investigation on Three Body Abrasive Wear of Al203 Filler on CFRP Composites”, International Journal of Advanced Engineering Research & Studies, Volume II, Issue III, 83-85, April-June 2013,
Tulsidas.D, Shantharaja.M & Kumar.K., “Improved Fillet Stresses In Steam Turbine Blade”, International Journal of Computer Aided Engineering & Technology, Inderscience Publishers, Volume 5,Issue 4, 329-342,2013
Tulsidas.D, Shantharaja M. & Bharath V, “Life Estimation of a Steam Turbine Blade using Low Cycle Fatigue Analysis” ,Elsevier, Procedia Materials science, Volume 5, 2392-2401,2014.
Tulsidas.D, Shantharaja.M , “Effect of taper and Twisted Blades in Steam Turbines”, International Journal of Science, Technology and Management, Volume 4, Issue 1, 319-325,2015.
Tulsidas.D, & Kumar K, Transient Stress Analysis and HCF life Estimation of a Gas Turbine Shrouded HP Compressor Blade, ASME Journal, 2016.
Tulsidas.D, Rahul Dixit, Mithun Raghunandan, “Experimental Investigation and Analysis of Critical Speed of Shaft”, Journal of Emerging Technologies and Innovative Research, Volume 6 Issue 5, 378-383, 2019.
Tulsidas.D, Rahul Dixit, Mithun Raghunandan, “Experimental Investigation and Analysis of Critical Speed of Shaft”, Journal of Emerging Technologies and Innovative Research, Volume 6 Issue 5, 378-383, 2019.
Tulsidas.D, Shantharaja M. & Bharath V, “Life Estimation of a Steam Turbine Blade using Low Cycle Fatigue Analysis” ,NITK,Surathkal, Conference
Tulsidas.D, & Kumar K, Transient Stress Analysis and HCF life Estimation of a Gas Turbine Shrouded HP Compressor Blade, ASME conference,2016, Conference
3. Tulsidas D, “Fatigue and creep analysis of a rotating shaft using ansys”, International conference on recent research emerging trends in materials and Mechanical Engineering, Reva University,2019
? R.G.Deshpande,Analysis of Cold-Hole Expansion by Split Mandrel as a Useful Technique in Aerospace Industries”, Journal of Manufacturing Engineering, vol. 2, no. 3, 2007
1. R.G.Deshpande “Effects of Zirconium addition on the Kinetics of Recrystalisation of an Al-Cu-Mg alloy” at the national level competition held at Bannari Amman Institute of technology, Satyamangalam.
2. R.G.Deshpande “Total Quality Management In technical education” in ICQRIT at New Delhi. Published in proceedings
3. R.G.Deshpande “Analysis of cold-hole expansion by split mandrel as a useful technique in Aerospace industries” to national level conference held at Kakatiya University.
4. R.G.Deshpande “Cellular structure of Metals & Alloys and their Engineering Application “at National Conference at Manipal Institute of Technology, Manipal
5. R.G.Deshpande “Analysis of Cold-Hole Expansion by Split Mandrel as a Useful Technique in Aerospace Industries” was published in Journal Of Manufacturing Engineering.
6. R.G.Deshpande, “Effects of addition of Zirconium on cube grains in commercial Al-Cu-Mg alloy” at International level conference Idem14 held on 10th and 11th January 2014 at M A College of Engg Kothamangalam, Kerala.
"Product Life Cycle Management" Text Book, Suggi Publications
Dr.M.H.Annaiah "Engineering Graphics" Text Book, MedTech Publications, Prescribed Text Book for VTU.
Dr.M.H.Annaiah "Design of Machine Elements-I and II" Text Book, New Age Publications, Prescribed Text Book for VTU.
Basavaraju.S, A comparative study on hardness and compressive properties of Nickel oxide Nanoparticles reinforced in epoxy based Nanocomposites, , Scopus
Basavaraju.S, Studies on Compressive Strength of Nickel Nanoparticle Fillers in Polymer Based Nanocomposites, JCIS, ISSN:1553-9105,
Basavaraju.S, Dynamic Mechanical Properties of Effect of Nickel Oxide Nanoparticles in Polyester based Nanocomposites., IJRASET,2018
Basavaraju.S, Studies on Dynamic Mechanical Properties (DMA) of Nickel Nanoparticles in Polyester Matrix Composites., IJRASET,2018
Basavaraju.S, A comparative study on hardness and compressive properties of Nickel oxide Nanoparticles reinforced in epoxy based Nanocomposites, 2018 Second International Conference on Recent Research Emerging Trends in Mechanical and Civil Engineeri
Basavaraju.S, Studies on Compressive Strength of Nickel Nanoparticle Fillers in Polymer Based Nanocomposites, 8th International conference on Recent Engineering and Technology-2018
1. Basavaraj Ganiger, T. M. Chandrashekharaiah, T.B. Prasad and V. R. Kabadi,” Studies on relationship between wear behaviour and microstructure of a hypereutectic Al-Si alloy”, Elsevier, Materials today proceedings, Vol. 5, Issue 11P3, ISSN 2214-785
2. Basavaraj Ganiger, T. M. Chandrashekharaiah, Manjunath Channappagoudar, Sanjay H. M. and Deepak Kumar N Y, “Effect of capillarity tube geometry on vapour compression refrigerator performance”, AIP Conference Proceedings. 2039, 020006-1–020006-7, 2
3. Basavaraj Ganiger, T. M. Chandrashekharaiah and T.B Prasad,” Modification performance of the Cu-P master alloy on commercial hypereutectic Al-24Si-Cu-Mg alloy”, IJERMS, ISSN 2394-7659, 2017, pp. 1-6.
4. Basavaraj Ganiger, T. M. Chandrashekharaiah and T.B Prasad” Dry Sliding Wear Behaviour of Commercial A393 alloy by the addition of Phosphorous”, MacGraw Hill Education, ISBN-13: 978-93-5260-730-3, 2017, pp.69-72.
5. Basavaraj Ganiger, T. M. Chandrashekharaiah and T.B Prasad, ” The effect of modification of primary silicon on the Microstructure, Mechanical and Sliding Wear behavior of Commercial LM-29 cast alloy”, American Journal of Material Science, Vol.5, N
6. Basavaraj Ganiger, T. M. Chandrashekharaiah and T.B Prasad,” Studies on the Effect of Minor addition of Phosphorous on Microstructure, Mechanical and Wear Behavior of LM-28 alloy”, International journal of Industrial lubrication and tribology Vol.
7. Basavaraj Ganiger, T. M. Chandrashekharaiah and T.B Prasad,” Investigation on the Microstructure, Mechanical and Wear Properties of Primary Si Modified Commercial LM-30 Alloy”, McGraw Hill Education, ISBN-13: 978-93-85880-75-9, 2015, pp.16-23.
1. Basavaraj Ganiger, “Elevated temperature wear performance improvement in commercial hypereutectic Al-Si alloys by Cu-P addition”, National Conference on Mechanical & Tribological behaviour of Advanced Composites 8th-9th Nov. 2019, held at Brinda
2. Basavaraj Ganiger, “Effect of capillarity tube geometry on vapour compression refrigerator performance”, International Conference on Sustainable Engineering and Technology (IConSET 2018), 19th April 2018, held at ACS College of Engineering Bangal
3. Basavaraj Ganiger and T. M. Chandrashekharaiah, “Studies on relationship between wear behaviour and microstructure of a hypereutectic Al-Si alloy” International Conference on Advances in Materials and Manufacturing Applications (IConAMMA 2017), A
4. Basavaraj Ganiger, “Dry Sliding wear behaviour of Commercial A393 alloy by the addition of Phosphorous”, International Conference on Emerging Research in Civil, aeronautical &Mechanical Engineering (ERCAM 2017), 21st July 2017, held at Nitte Mee
5. Basavaraj Ganiger, “Modification Performance of the Cu-P master alloy for Commercial Hypereutectic Al-24Si-Cu-Mg alloy”, International Conference on Advances in Mechanical Sciences (ICAMS 2017), 3rd -5th March 2017, held at Malnad College of Engin
6. Basavaraj Ganiger, “Investigation on the Microstructure, Mechanical and Wear Properties of Primary Si Modified Commercial LM-30 alloy”, International Conference on aterials and Manufacturing Technology (ICMMT 2015), 5th -7th Nov. 2015, held at Vi
7. Basavaraj Ganiger, “The effect of modification of primary silicon on the Microstructure, Mechanical and Sliding Wear behavior of Commercial LM-29 cast alloy”, National Conference on Emerging Trends in Mechanical Engineering (e-TIME 2015 ),
8. Basavaraj Ganiger and T. M. Chandrashekharaiah “Effect of minor addition of P on Microstructure and wear behavior of A390 alloy”, International Conference on Advances in steel, Power and Construction Technology (ICASPCT 2015), 14th -16th Jan. 201
9. Basavaraj Ganiger and T. M. Chandrashekharaiah, “The Effect of Minor addition of grain modifier on Microstructure, Mechanical and Wear Behavior of LM-28 alloy”, Procedings of international Conference on Advances in Light Metals and Composites (CAL
10. Basavaraj Ganiger andT. B. Prasad,“Experimental Study on Effects of Zirconium Oxide (ZrO2) as a TBC on 4-Stroke CI Engine Performance”, International Conference on “Advanced Materials, Management, Manufacturing, & Thermal Sciences”.(AMMMT-2010),
1. Siva Murali Mohan Reddy.A, Manjunath .p.c “Numerical Analysis of a combustor for producer gas application”, National conference on Emerging trends in Engineering And Technology, 11th May 2013,Sapthagiri college of Engieering ,Bangalore.
2. Siva Murali Mohan Reddy.A,Srider.B “ CFD Simulation on Gas Turbine Blade and effect of hole shape of leading edge film cooling effectiveness” international journal of innovative reaserch in science in 2011.
3. Siva Murali Mohan Reddy,venkatesh M. kulkarni “An Experimental Investigation of Heat Transfer Performance for Forced Convection of Water in a Horizontal pipe partially filled with a Porous Medium.” IOSR Journal of Mechanical and Civil Engineering
4. Siva Murali Mohan Reddy,Venkatesh M. Kulkarni “Review of heat transfer enhancement in a heat exchanger with partially filled porous media” International Journal of Current Research Vol. 8, Issue, 06, pp.33245-33252, ISSN: 0975-833X June, 2016.
5. Siva Murali Mohan Reddy etall Investigation and performance evaluation of hippie seed oil blended with diesel using the twin cylinder diesel engine. The Clarion Volume 5 Number 1 (2016) PP 14-22 ISSN : 2277-1697.
6. Siva Murali Mohan Reddy et all Investigation and Performance Evaluation of Honge Seed oil blended with Diesel Using the Twin Cylinder Diesel Engine international Journal of Advance Foundation And Research In Science & Engineering (IJAFRSE) Volume
7. Siva Murali Mohan Reddy etall Investigation and Performance Evaluation of Ethanol Blended with Diesel Using the Single Cylinder Diesel Engine International Journal of Ethics in Engineering & Management Education Website: www.ijeee.in (ISSN: 2348-4
8. Siva Murali Mohan Reddy.Aetall Investigation and Performance Evaluation of Rubber Seed oil Blended with Diesel Using the Twin Cylinder Diesel Engine Reddy International Journal of Ethics in Engineering & Management Education Website: www.ijeee.
9. Siva Murali Mohan Reddy ,Design & performance analysis of single axis solar tracking mechanism using micro controllers. International Journal of Research in Engineering and Technology. ISSN: 2319-1163 , 2017.
10. Siva Murali Mohan Reddy ,Design and analysis of waste heat recovery system from domestic refrigerator for water heating applicationInternational Journal of Research in Engineering and Technolog
11. Forced Convection Heat Transfer In A Horizontal Pipe Partially Filled With Porous Media - A Finite Element Analysis by using the CBS Procedure. International Journal of Engineering Technology Science and Research ISSN 2394 – 3386 Volume 5, Issue
12. Siva Murali Mohan Reddy A., Venkatesh M. Kulkarni,CFD Simulation of Flow and Heat Transfer in a Horizontal Pipe Partially Filled with Porous Media,International Journal of Research and Scientific Innovation, 2018 ,Vol. V, Issue VI,
13. Siva Murali Mohan Reddy A., Venkatesh M. Kulkarni,, Numerical investigations on fluid flow through porous media and empirical correlations for pressure drop, International journal of recent technology and engineering , 2019. vol. 8, Issue-IC.
1. Siva Murali Mohan Reddy A., Venkatesh M. Kulkarni,, The effect of porous material on transient free convection in a concave shaped cavity , International conference on advanced research in mechanical engineering , 2019,MVJ college of engineering,
2. Siva Murali Mohan Reddy A., Venkatesh M. Kulkarni,, Numerical investigations on fluid flow through porous media and empirical correlations for pressure drop, Second international conference on emerging trends in science and technologies for engine
3. Siva Murali Mohan Reddy A., Venkatesh M. Kulkarni,, Mathematical modeling in matlab for convection through porous media and optimization using ABC algorithm , Numerical optimization in Engineering and sciences,2019, National institute of technolog
Madhu Kumar YC, Umashankar “Evaluation of Mechanical Properties of Aluminum Alloy 6061-Glass Particulates Reinforced Metal Matrix Composites” International Journal of Modern Engineering Research, vol.2, issue 5, 2012, pp 3207-3209.
Madhu Kumar YC, Umashankar “Production and characterization of Al6061-Glass particulate stir cast composite” International journal of Research in Engineering and technology, Vol 05, issue 13, 2016, 152-155.
Madhu Kumar YC, Umashankar “Aluminum Metal Matrix Composite Reinforced with Glass Particulates” Journal of Advances in Science and Technology, Vol.12, Issue.25, 2016, 321-323.
Madhu Kumar YC ‘’ Evaluation of sliding wear behavior of Glass Particle Reinforced Aluminum Alloy 6061 Metal Matrix Composites’’International Journal of Advances in Scientific Research and Engineering,Vol.3, Special Issue.1, 2017, 146-149.
Madhu Kumar YC, Umashankar “Production and characterization of Al6061-GlassParticulate stir cast composite” ICRAES 2016, 8-9 September2016, Ramaiah institute of technology.
Madhu Kumar YC, Umashankar “Aluminum Metal Matrix Composite Reinforced with Glass Particulates” ICRIE 2016, October 2016, HSIT.
Madhu Kumar YC, Umashankar “Processing and Evaluation of Mechanical and wear properties of glass particulate reinforced Aluminium Metal matrix composites, STFCS 2016, August 2016, University of Mysore.
Madhu Kumar YC, Umashankar “Evaluation of Mechanical behavior of glass particulate containing Al 6061 Alloy composites’’ ISME-2017, 23-25 February 2017, NIT Warangal.
Madhu Kumar YC, Umashankar Evaluation of Sliding wear behavior of Glass particle reinforced Aluminium alloy 6061 metal matrix composites, ICERTMCE2017, Reva UniversityBangalore.
1. Ramesh.N.G “Fatigue Analysis of a Panel Consisting of Window Cutout and Frames in the Fuselage of a Transport Airframe’’ International research journal of engineering and technology(IRJET), vol-3, issue 4.
2. Ramesh.N.G The paper titled “Finite Element Analysis of a Diesel Engine Connecting Rod’’ Journal International Journal of Engineering Science & Research and Technology (IJESRT), vol3, issue 6.
1. Ramesh.N.G , Presented Paper titled “Fatigue Analysis of a Diesel Engine Connecting Rod” in the National conference held on 13th & 14th August 2013, organized by Vemana Institute of Technology, Bangalore.
2. Ramesh.N.G , Participated National convention of Aerospace Engineer held on 26th & 27th November 2009 organized by the Institute of Engineers (India), Bangalore.
1. Akshay M P, Anil Kumar N, AnupPotdar, Darshan S B, Ram Kumar M, “Fabrication of Semi-Automated ARC Welding Machine”, International Journal of Engineering Research & Technology (IJERT), ISSN:2278-0181 , 2017- GOOGLE SCHOLAR
2. Dr.Srikantappa A.S, Ram Kumar M, “Numerical Analysis of tensile properties of Unidirectional Coir fiber Reinforced Epoxy Composite Laminate”, International Journal of Research in Aeronautical and Mechanical Engineering (IJRAME), ISSN:2321-3051, 20
3. Ram Kumar M, Dr.Srikantappa A.S, “Evaluation of Mechanical Properties of Glass Fiber and Coconut Fiber reinforced Hybrid Polymer Matrix Composite with Bentonite Powder as Particulate Filler”, Journal of Computational and Theoretical Nanoscience, I
1. Ram Kumar M, Dr.Srikantappa A.S, “Evaluation of Mechanical Properties of Glass Fiber and Coconut Fiber reinforced Hybrid Polymer Matrix Composite with Bentonite Powder as Particulate Filler”, Journal of Computational and Theoretical Nanoscience, I
1. Madhu G, Mallikarjun G B, ajay C K, Sanjay H M- “Design and fabrication of multi agricultural equipment ”, international journal of advances in scientific research and graphics.vol.3special issue 1 aug-2017 (E-ISSN:2454-8006)
1. Sanjay H M ,Energy scenario and management review-national conference on green energy: potential & applications-2016 at VCET Puttur.
2. Sanjay H M , Fabrication & Characterization of As Cast and Heat Treated Al2024/Al2O3/Gr Hybrid Metal Matrix Composites-2017 at SJBIT-Bangalore
MohanAE, Analytical & Numerical simulation of Shell & Tube heat exchanger has published in International journal of inventive Engineering & sciences (IJES)’, ISSN: 2319 -9598 VOLUME- 4 ISSUE -6 PAGE NO. 1-5, JUNE 2017
MohanAE, Analysis of tensile and hardness properties of Aluminium 7075 based Metal Matrix composite has published in International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE) Vol 2, Issue 5, May 2017
P.R.Anilkumar, "Adhesive and abrasive wear behaviour of Kenaf long fibre reinforced epoxy composites", Matrerials Today Proceedings, 2020, https://www.sciencedirect.com/science/article/pii/S2214785320380226
P.R. Anilkumar, "Mechanical and Wear Characterization of Ceramic Boron Carbide-Reinforced Al2024 Alloy Metal Composites", Journal of Bio- and Tribo-Corrosion , 2021, https://doi.org/10.1007/s40735-020-00454-8
R. G. Deshpande, "Mechanical Fractography and Worn Surface Analysis of Nanographite and ZrO2-Reinforced Al7075 Alloy Aerospace Metal Composites", Journal of Failure Analysis and Prevention , 2021,https://doi.org/10.1007/s11668-020-01092-5
R G Deshpande, "Investigations On Mechanical Behavior Of B4c And Graphite Particles Reinforced Al2117 Alloy Hybrid Metal Composites", Palarch’s Journal Of Archaeology Of Egypt/Egyptology,2021,17(6). ISSN 1567-214x , https://archives.palarch.nl/in